How to wash plastic windows and window sills

With the arrival of heat, many housewives start spring cleaning. This includes cleaning windows and window sills. Often on plastic products there are traces of street dirt and dust, excess moisture from flowers. If you do not wipe the windowsill in time, yellow spots begin to form on it. How you can get rid of this problem, we will consider in more detail.

Choosing a window sill cleaning method

The first step is to remove the dust and dirt from the windowsill in a dry way. Only after that it is worth resorting to chemicals and cleaning with water. It is worth considering the coating of plastic products.

Smooth glossy finish

1. For window sills with such a coating, soft tissues or sponges should be used. Devices should not contain abrasive components, metal chips.
2. Microfiber cloths and damp cloths are allowed. You can also use a melamine sponge. Try cleaning the surface with the listed remedies before embarking on chemicals with active ingredients.

Ribbed or rough finish

1. To clean window sills with a similar structure, it is allowed to use hard brushes and sponges. It is important to monitor the process, otherwise you risk leaving visible scratches.
2. Exclude the cleaning method with soft rags and cotton sponges, otherwise the abrasive surface will become clogged with dirt. To clean the contaminants without the use of special tools will not work.

General recommendations for cleaning windowsills and windows

1. To get to the dirt between the windowsill and the window frame, you should resort to using an unnecessary toothbrush or cotton swabs.
2. If there are traces of repair in the form of soil, glue or foam on the surface of the plastic product, you need to purchase a rubber spatula. With it, you can get rid of the problem without damaging the surface.
3. In the event that you decide to remove pollution by folk methods, it is worth paying special attention to the process. Some chemical components are quite aggressive. As a result of the procedure, the plastic window sill may change color.
4. When buying directed funds to clean the surface from contamination, take into account the fact that the product packaging should be marked with the scope of the substance. The components of the product should allow working with plastic coating and windows.
5. Do not neglect the safety rules and instructions for use. Start cleaning the window sill with a normal wipe with a sponge dampened in warm water. It is also important to wipe the plastic product dry with a clean rag.
6. During cleaning, try not to use products with hard abrasive particles that do not dissolve in water. If you want to get rid of a specific spot, it is worthwhile to apply the chemical composition to the pollution zone. A regular soap solution is not able to save you from this problem.
7. Before removing the consequences of repairs, the composition must be soaked, resort to the help of a sponge and hot water. Also, to achieve the best effect, you can use laundry soap, grated. If the above simple methods did not help to get rid of the problem, you need to use more effective means.

Folk cleaning methods for window sills and windows

Melamine sponge

1. With the help of a melamine sponge, you can wipe off almost everything, whether it is stubborn old dirt or stains of rust.
2. If you do not have the opportunity to purchase such a tool, use soap shavings.The substance will help to cope with light pollution.

Soap based solution

1. You can dilute a highly concentrated solution based on laundry soap (half a bar per 0.5 liters of water).
2. It is enough to apply the substance to the problem area, wait a bit, then rub it thoroughly with a toothbrush or a kitchen sponge.

Dishwashing liquid

1. To remove stubborn greasy stains, a dishwashing detergent in the form of a gel is suitable.
2. Apply the composition to contamination, wait half an hour, work with a sponge. Then wipe the surface dry, if necessary, repeat the manipulation.

Chalk and starch solution

1. If the grease stain is relatively fresh, sprinkle it with chopped chalk. Wait a third of an hour, rub the contamination with a brush and water with starch (100 g per 1 liter).
2. You can also use special napkins for cleaning microwave ovens, they are sold in all hardware stores.

Washing powder

1. In case you are dealing with a stubborn old stain, powder for a washing machine with active components will come to the rescue.
2. Dilute the composition in a small amount of water, the output should be a thick slurry. Apply the mixture on a stain, wait 20-25 minutes, rub with a sponge and non-hot water. Dry the windowsill.

Lemon acid

1. A solution of citric acid or natural citrus juice does a good job of difficult contaminants.
2. Mix 10 gr. acid with 30 ml. water, apply for 10 minutes, then rub thoroughly with a brush. You can also squeeze lemon juice to the place of contamination and repeat the manipulation.

Chemical substances

1. To get rid of children's drawings made by felt-tip pens or pens, ammonia or pure alcohol will help, as well as acetone nail polish remover.
2. Put any of the listed components on a cotton pad, rub the place of contamination with the impregnated material. Fix the result with detergent, if necessary, repeat the procedure several times.

Baking soda and vinegar

1. It is important to consider that when these components interact, the surface may become too bleached. Therefore, do not keep the composition on a plastic coating for more than 10 minutes.
2. Combine the required amount of soda and 9% table vinegar. Top up the liquid if necessary, the result should be a thick slurry.
3. Apply the product to the places of pollution, wait 8 minutes, wipe the surface with a kitchen sponge. Wash the windowsill with warm water, wipe with a dry cloth.

Mustard

1. If your house does not have a white window sill, it should be cleaned with mustard powder. Dilute the bulk composition with water to a homogeneous slurry, apply to the problem place.
2. Rub the dirt a little with a sponge, repeat the procedure if necessary. Be careful, the product may leave irreparable stains on the tinted coating.

Hydrogen peroxide

1. A solution of hydrogen peroxide and water will help to cope with yellowish smudges and spots. The components need to be connected in a 1: 1 ratio.
2. Put the solution on a stain, rub. Be careful. The composition can adversely affect the coating and leave stains.

Before you start cleaning windowsills, examine the structure of the coating. If it is smooth, do not use abrasive products. In the case of ribbed surfaces, you can use a melamine or kitchen sponge, hard rags, napkins for cleaning microwave ovens. Citric acid, ammonia, laundry soap effectively remove pollution.

Video: how to clean windows