The content of the article
How to remove liquid wallpaper from the wall? This question arises in two cases: you put an irreducible stain or you are tired of the wall design - it's time to change something already. We warn you right away, this is a dirty business. Especially if you applied liquid wallpaper in accordance with all the rules. That is, the grip on the wall is very strong.
Removing liquid wallpaper from the wall is not very difficult. But dreary and long. Let's see what needs to be done.
If liquid coated wallpaper
Some owners after the final drying of liquid wallpaper cover them with varnish on top. Sometimes then they additionally paint. In this case, you will have to work hard to remove them from the wall. To do this, you will need:
- Masking tape.
- Thick film, a lot.
- Grinder, drill or grinder with a special nozzle.
- Goggles, respirator, gloves. The spacesuit is best; below you will find out why.
- The ability to handle a power tool, remarkable strength, endurance and the desire to leave the lion's share of nerves and time in the room under repair.
The order of work. First you need to close all surfaces with polyethylene in the room. Furniture, floors, window sills, windows, skirting boards, chandeliers, sockets, switches, doors. Everything! For greater reliability, polyethylene is glued with masking tape. It holds well, but leaves no residue and does not injure the surface.
After all the preparations, they put on protective equipment and begin to peel the wallpaper from the surface of the wall using a grinder. It will have to be pressed with good effort so that the grinding wheel can overpower the paintwork and a decent layer of liquid wallpaper.
After five minutes of work, they realize their mistake and remove the protective equipment. They are now clothed in a spacesuit. Because there is not much dust and small debris, but a lot!
By the way, according to reviews, one grinder or drill will not be enough. After about 4 hours of intense work, the hands cease to work from wild stress. And not every power tool can withstand such a rhythm. Usually, on the fifth square meter of the surface to be cleaned, the grinder burns out or the tape is worn out. The drill heroically dies on the seventh square meter. The most hardy is the Bulgarian. But she gives up after about a tenth of a meter.
During a break, it is customary to look at the scale of destruction, to assess the amount of dirt and the effort expended. Further, according to the rules of repair, it is necessary to spit on this disastrous business. Then follows the call to the master who stuck this liquid wallpaper to the walls. After a while, a team of good fellows arrives with a tool similar to a metal detector. They are fast enough, but still dirty doing their job.
At the end, you give them the money and promise to use liquid wallpaper to repair other rooms. And then you type in a search engine - how to seal a hole in drywall? Because they tried very hard to remove the liquid wallpaper from the wall themselves.
Tip. Do not cover liquid wallpaper with polymeric agents. No doubt, this design has served for more than 15 years. But, when you get tired of it, changing it will be difficult.
If liquid wallpaper is uncoated
Other owners do not create unnecessary trouble for themselves. During the previous repair, the masters stuck liquid wallpaper on the walls. Beautiful, spectacular. People lived and admired. They didn’t apply varnish, they didn’t paint.
But, one fine day inadvertently put a stain on the wall. Or they decided to update the coverage completely. Such owners are much easier. They will need:
A lot of hot water and wallpaper glue or a special liquid.
- Bucket or basin.
- Paint roller, brush, spray gun. We try, choose the most suitable tool.
- Wide hard spatula.
- A piece of oilcloth.
- Cookies with tea.
- Self-confidence and a little time.
The order of work. In water, we dilute a little glue or a special liquid to remove liquid wallpaper. Then the resulting mixture is applied to the walls. We water abundantly so that the coating is well saturated. Here we look what will be more convenient from the tools of point 3. Below, we first lay a piece of oilcloth.
It makes no sense to process immediately a large area. When you get there, everything will dry. Soak liquid wallpaper in pieces. After that we leave for 10-15 minutes. This is where cookies with tea come in handy.
Then come back. We take a spatula and just with confident movements we remove the liquid wallpaper from the wall. If they were applied according to all the rules of technology, then they will be removed in even layers. We lay out these pieces on oilcloth, let them dry.
We look at the time and effort spent. Is it a matter of debate and not stress? So we impregnate with liquid another section of the wall. While it swells, you will already clear the first.
Are you a little breathless or are the wallpapers removed with effort? Soak the coating again with water. We ourselves again go to rest and chew cookies.
In this way, without straining at all, you can remove liquid wallpaper from the wall in a room at least 6 by 6 meters in one day. And do not spend money, causing a team of craftsmen finishers. At the same time, you’ll pile plenty of cookies.
Tip. The captured wallpaper can be dried and stored in an airtight bag. In fact, this is the usual papier-mâché, only based on wallpaper glue. They can be used several more times. Of course, for a living room, beauty will no longer be the same. And for a country house or a corridor, such liquid wallpaper will fit perfectly.
If you do not want to shoot liquid wallpaper
The third category of people acts quite simply. They do not remove liquid wallpaper from the wall at all. They simply polish the surface slightly, then primer it. Top leveling putty is applied and primed again.
Well, and then they do everything that the soul desires and allow the repair budget. The method is widely used by a large mass of people, but professionals are very skeptical of such know-how. There is information that poorly applied liquid wallpaper will then simply fall off the wall with a new coating. Be it stucco, plain wallpaper or putty. Yes, and in rooms with poor ventilation or high humidity under such a “cake” of decoration materials, mold or fungus will happily settle.
Tip. For any type of repair, follow the recommended finishing technology so that in the future you don’t have to spend even more money on remodeling.
Useful Tips
- Does your home have such a miracle of modern technology as a steam generator? Congratulations, it’s even easier for you. Instead of a brush or roller, treat it with liquid wallpaper. Then things will go much faster, you won’t have to wait until it gets wet.
- Some sources recommend using a building hair dryer to soften liquid wallpaper. Do not even think! Burn electricity - enough for three Kremlin Christmas trees, and the result is almost zero. Because dry, without liquid treatment, it is almost impossible to soften the liquid wallpaper with only one hot air.
- It is sometimes advised to take a spatula with a curved handle. Like a trowel. They say it’s easier to work. Doctors According to reviews, the most ordinary straight putty knife is much more effective. Here, the stiffness and width of the blade, and not the curvature of the handle, are more important.
How to remove liquid wallpaper from the wall? If they were without additional coverage, then it is very easy and simple. In the case when the paintwork layer is applied on top of the wallpaper, it is better not to mess. Call the masters. Their services can be bought, but their nerves, health and strength - not.
Video: how to remove liquid wallpaper
Submit