How to get rid of scratches on glasses: 6 ways

Glasses scratches are an unpleasant discovery for many people. Besides the fact that such a defect distorts visibility, it also spoils the wearer's vision. In cases where the accessory lenses are made of plastic, scratches can be polished with home remedies at hand. You will no longer need to buy new glasses or repair old ones for fabulous money. It makes sense to consider important aspects in order and provide practical recommendations. So let's get started.

How to remove small scratches on glasses

To remove small scratches that are formed in the process of light friction of the lenses with the surface is quite simple. Before starting the procedure, wipe the glasses with a special cloth for PC monitors or LCD screens. You can also use the cloth that comes with the glasses.

1. Toothpaste. To remove small scratches, take a toothpaste without abrasive particles (any children’s or “Black Pearls” will do). Apply a small amount of the composition to the surface of the lenses, go through a cosmetic sponge with light circular movements, do not press hard. After all the manipulations, rinse the paste with cold water. In the case of deep scratches, you will have to repeat the action 2-3 times.
2. Baking soda. If you don’t have toothpaste without abrasive particles on hand, use a soda based compound. Dilute the granular composition with filtered water at room temperature so that a pasty mass is obtained. Spread the product with scratches, rub it with a microfiber cloth or cosmetic swab.
3. Scratch paste. In the optics salon you can purchase a special gel for polishing lenses. As a rule, the cost varies from 220 to 500 rubles, it all depends on the manufacturer. The technology for using the product is quite simple: apply the gel on the surface of the lenses, wipe with a special alcohol wipe (included). Some manufacturers recommend keeping the paste for some time, proceed from the instructions.
4. Polish for silver / copper. In cases where the above compositions were not effective enough, use a paste to polish silver or copper. The tool can be purchased at a jewelry or antique store, the pricing policy is relatively low (about 250 rubles). To use the composition, spread it over the lenses with a thin layer, then wipe it with a microfiber cloth or a piece of velvet cloth. It is important to remember forever that the polish for copper / silver should not fall on the frame of the glasses, otherwise you will ruin it.
5. Wax for polishing cars. There are frequent cases when scratches do not disappear after using the above methods. A similar feature is characteristic of deep creases that can be artificially filled. For these purposes, purchase wax for polishing cars (for example, Turtle Wax), use it according to the instructions. The tool fills not only deep scratches, but also microcracks. When polishing is complete, treat the lenses with a cloth soaked in alcohol. Repeat simple actions once every 5-7 days. If desired, you can replace the car polish with wax for furniture.

How to remove large scratches on glasses

The above remedies are effective in the case of minor scratches. If the coating of the lenses became cloudy from the defects that appeared, a more colossal approach, such as removing the top layer, would be required. It is important to understand that after the procedure the glasses will be unprotected, while the procedure is only suitable for working with plastic.This is especially true for accessories designed to work for a PC, as well as sunglasses.

1. First of all, wipe the lenses with a special cloth for glasses soaked in alcohol. After that, wipe the lenses dry with a microfiber cloth, raise the glasses higher to see the scratches.
2. Visit a store selling art supplies and needlework kits. Get an abrasive composition for glass parts, turn the bottle over, study the column “Composition”. The product should contain hydrofluoric acid, the main purpose of which is to dissolve glass. Since your lenses are made of plastic, this effect will not occur. However, you can remove the top layer without affecting the main part of the lenses.
3. When working with the material, be sure to protect the skin of the hands, respiratory tract and eyes (if possible). Remove the lenses from the eyeglass frame to greatly facilitate your task. Prepare a glass or plastic container in which the procedure will be performed. Make sure that in future the container is not used for storing food.
4. Scoop a small amount of the composition onto a cosmetic swab or sponge, apply an even thin layer on the coating, place the lenses in a container. Leave for a certain period (the exact time is indicated by the manufacturer in the instructions). As a rule, it is about 2-3 minutes, not longer.
5. Remove excess makeup with a cosmetic sponge or cotton pad, rinse your lenses with cold water. Wipe dry, wipe with a piece of velvet cloth. Insert the lenses into the frame, evaluate the result. If the effect is insufficient, use a polishing compound designed specifically for glasses.

After the procedure, purchase a special protective film for the lenses in the optics salon, which will prevent further scratches. Wear glasses in a case, regularly wipe them with a microfiber cloth. Fill cracks with gel polish for cars or furniture. Consider folk recipes based on toothpaste or baking soda. Buy a polish for copper or silver, in extreme cases, remove the coating with an abrasive for glass.

Video: perfect cleaning of glasses in 3 minutes