How to get rid of limescale in the bathroom

A clean, sparkling bathroom is the comfort of the house, the pride of the hostess, as well as important hygiene conditions. However, keeping a bath clean is not so easy. After all, the bathroom is the most popular place in the house. Each family member uses it several times a day. And constantly on the surfaces there are water smudges, soap stains, particles of toothpaste. Over time, such a layer turns into limescale, which must be disposed of.

What is limescale

Water falling on the surface of the bathtub, tile, glass shelves and the rim of the toilet bowl dries and leaves a cloudy coating. This is because the water is quite hard, it contains salts of magnesium and calcium. You can get rid of such a plaque only with substances that contain acid in their composition. Today, advertising provides us with a wide selection of alkaline and organic cleaners that remove limescale instantly. All these products are available in different forms - powder, spray, gel.

How to use special detergents

To get an effective result, you need to follow the correct algorithm when applying detergent.

1. Before cleaning, always wear gloves. Most detergents corrode the skin. If you are allergic to detergents, you can also wear a mask. Thus, toxic fumes do not enter your body.
2. After fully equipping, the surface to be treated and the sponge must be thoroughly moistened.
3. Apply detergent. The spray can be applied directly to the surface from which it is planned to remove limescale. The gel and powder must be applied directly to the sponge and only then wipe the surface to be cleaned with it.
4. Thoroughly rub the areas affected by lime. Leave the surface for half an hour.
5. Wipe all dirty places again with a sponge. Wash everything under running water. No toxic substance should remain on the treated area. If heavily soiled, repeat the process.
6. Wipe dry all washed surfaces. This is best done with a microfiber cloth. She does not leave stains and villi, wipes dry.

How to remove limescale from a tile

After repair, the tile looks perfect - it shines and sparkles. However, over time, it becomes dull, cloudy and ugly. So what to do? Well, don't do the repairs again, really?

Properly selected product will save your tile from dirt, limescale. Mold and fungus can also form in the tile joints. This comes from constant dampness and high humidity. Therefore, the tile must also be cleaned with antibacterial agents. There are a lot of them on store shelves, but if you are allergic to detergents, you need to use household tricks.

So, vinegar will help to quickly and efficiently clean the tiles in the bathroom. Usually use a weak solution, only 6%. If the vinegar in your home is stronger, it must first be diluted. Pour the prepared solution into a container that has a pulivizer and spray vinegar over the affected areas. Then sprayed surfaces must be thoroughly wiped with a brush or sponge.It is important to understand that the brush must be colorless, because vinegar strongly corrodes the structure and the villi can leave color stains on the tile.

How to clean a ceramic bath and toilet

Ceramics is a rather unthinkable material. However, in order to preserve ceramic products in their original form, you need to properly care for them. Firstly, you can use the same vinegar. Copes with limescale and apple cider vinegar.

When cleaning the toilet, it is very important to maintain hygiene, because a clean toilet is the key to family health. In addition to antimicrobial plates, which are attached to the rim of the toilet bowl, you need to clean it with a brush and antibacterial agents every week. And in order to remove old calcareous deposits from the surface of the toilet, you need to pour it with a solution of vinegar overnight. In the morning, flush the water in the toilet and you will see that there is no trace left of the plaque. I want to note that more aggressive cleaning products are designed for the toilet, so they can not always be used to clean bathtubs.

Citric acid will help to clean the bath itself from limescale. It can be scattered on contaminated surfaces and cleaned like powder. Citric acid can also be diluted - a tablespoon in a glass of clean water. The prepared solution is much faster.

We clean the cast-iron bath from limescale

Cast iron - a durable and sound material. Such baths retain heat for a long time. However, they are also subject to limescale. You can deal with them using ordinary soda. A little powder should be scattered over the entire surface of the bath and cleaned as you normally do. Soda not only cleans, it kills germs and whitens the surface.

If there are old spots on the bath, then soda can be mixed with laundry soap and ammonia. Such a composition will eliminate even the most ingrained pollution.

How to remove limescale from acrylic surfaces

Acrylic bathtubs are gaining popularity. After all, they are quite light, durable, smooth, and also perfectly retain heat. However, such bathtubs are prone to scratches. Therefore, when choosing a cleaning product for an acrylic bath, it is important to choose the most gentle copy. When using acrylic surfaces, it is also important to remember that excessively hot water should not be poured into such a bath.

When choosing an acrylic bath cleaner, give preference to gel and spray. Powder may leave small scratches on the surface. For such a bath, soda, ammonia, acetone and other corrosive compounds cannot be used. When choosing a cleaning product, you need to find the inscription "can be used for acrylic bathtubs" on the packaging. Only this designation will provide you with a clean bath without scratches and “corroded” places.

We clean glass shelves, mirrors, plastic from limescale

Small streaks from the above surfaces can be eliminated with a normal soap solution. We clear glass and mirrors with all designated means - soda, vinegar, citric acid. To prevent turbidity and streaks when cleaning glasses and mirrors, you need to use ordinary or ammonia.

When cleaning plastic, do not use powder — only liquid, creamy, or paste-like products — to avoid scratches.

By the way, in order to clean the shower and its hose from plaque, you need to place the structure in a bucket with citric acid diluted there for half an hour. Such a tool will clean every bend and you do not have to apply great effort.

Popular ways to get rid of limescale

1. In addition to soda, citric acid, vinegar and ammonia, bleach can be used. It cleans, disinfects, eliminates yellowness.
2. To improve the action of vinegar or lemon water, the prepared mixture must be preheated.
3. To combat limescale, turpentine or a solvent for oil paints can be used.
4. You can clean surfaces with chlorine.It perfectly cleans and prevents the growth of microbes and bacteria.
5. You can clean the surfaces with a steam cleaner. Due to high temperatures, it penetrates deep into the plaque and destroys it.
6. It is safe to clean faience, metal, plastic and enamel with oxalic acid. This acid is part of most cleaning products, but in a pharmacy you can buy it many times cheaper. Oxalic acid must be diluted with water to a creamy state, and then apply the mixture to dirty surfaces. Leave for 3 hours, then rinse with a sponge. There will be no trace of your spots.
7. You can also clean surfaces with ordinary lemon juice diluted in half with water.

To keep the bath in good condition, you should regularly do easy cleaning and systematically wipe the surfaces. And then the limescale simply does not have time to appear. Let the cleaning be pleasant and comfortable, and your bath will always shine and delight the eye.

Video: how to clean the sink and bathroom of limescale