How to get rid of mold on plastic windows

Today, plastic windows are not considered a luxury, they are installed for convenience and thermal insulation. Double-glazed windows are mounted in industrial and residential premises, offices and even greenhouses. Plastic windows have their advantages and disadvantages. The latter include the appearance of fungus on the slopes and frame. Mold spreads in a short time and does not look aesthetically pleasing. For this reason, many housewives want to quickly get rid of the focus of bacteria. There are many ways that we will talk about today.

Causes of mold

1. Inadequate ventilation. Poor circulation leads to air stagnation and increased humidity. Often you can feel an unpleasant odor emanating from the room. Double-glazed windows do not pass air, this is a plus and minus at the same time. To eliminate the negative side, you need to equip the room with good ventilation or open windows more often. Synthetic curtains, a wide window sill and slopes significantly complicate access to oxygen.
2. High humidity. Due to the thermal insulation properties of the material, condensation forms on the surface of the windows. It accumulates first in the lower part, then descends to the corners. Plastic can not evaporate moisture, unlike wood. If we add to the above the incompetence of the masters in the installation of double-glazed windows, the tightness is violated. Water stagnates, allowing bacteria to multiply at double speed.

How to get rid of mold foci on double-glazed windows

1. To reveal that humidity is increased, visual inspection will help. If condensation accumulates in the lower part of a double-glazed window, mold has a chance for full reproduction.
2. Inspect the center of "fire." If you notice blotches of black color, proceed to eliminate them. Prepare a solution of biocides and whiteness, remove fungal neoplasms.
3. If mold has affected slopes and drywall, disassemble the structure. Process with the same solution, dry, insulate with 3 layers of polyurethane foam.
4. When the foam becomes hard, cut off the excess with a clerical knife. Fill the chips and possible cracks with sealant. After all the manipulations, cover the slopes with finishing material or paint.
5. Next, process the glass with a solution marked "Anti-mold". Apply the product on plastic parts, keep for at least 2 days. After that, wash the windows in the usual way, without using cleaning compounds.
6. For further control of the humidity level, buy a hygrometer. The device shows deviations, you can take measures in time regarding the ventilation of the room. The mark should not rise above 35%.
7. If you are unable to reduce humidity, wipe the window with a dry cloth every day. Also hang a thermometer to measure air temperature. Try to keep the indicator within 20-22 degrees.

How to wash mold on plastic windows

1. Chlorine-containing drugs. Means like chlorine not only eliminate mold, but also allow you to disinfect the room. Chlorine needs to be diluted. Per 100 ml. the drug accounts for about 500 ml. water. Before processing moldy areas, wear a miniature respirator, protect your hands with gloves. Whiteness kills the fungus immediately, so it makes no sense to stand the remedy for a long time. The hard composition of the whitening product adversely affects the decor. You do not need to use bleach when removing mold from the front parts of double-glazed windows.
2. Copper sulfate. The product is sold in hardware and gardening stores. As with bleach, rubber gloves must be worn before treatment and airways protected. Next, the composition is distributed on the sponge, it already wiped the frames, window sills, slopes, glass. It is not necessary to distribute vitriol on metal elements so as not to cause premature corrosion. After cleaning, ventilate the room for 1 hour.
3. Chlorine and vitriol. If you need to eliminate a large amount of mold, which managed to hit the inner layers of the material, use the mixture. Combine the chlorine-containing preparation and copper sulfate in equal amounts. Dilute with water, per 1 liter. liquid accounts for 200 ml. mixtures. Wear a respirator, protective gown and gloves, proceed to eliminate the fungus. Wipe the windowsills, frames, slopes, leave the composition for a maximum of 10 minutes. Always complete cleaning with a regular wash.
4. Table vinegar. To eliminate the focus of infection, you can use undiluted vinegar. First, wipe the lesion with a dry cloth, then sprinkle vinegar over the affected areas. Try to distribute as much of the composition as possible. After 2 hours, blot with a cloth, rub the area with mold with a sponge. If the fungus is not fully hatched, repeat the procedure again.
5. Hydrogen peroxide. Prepare a pasty mass from drinking soda and filtered water. Spread the slurry over the moldy areas, then transfer the hydrogen peroxide to the spray bottle. Spray with the preparation a soda-treated area. You will notice that the substances have reacted. Bubbles will appear on the surface. As soon as the hissing stops, note the time, wait a quarter of an hour. After this period, remove the excess with a sponge, wipe the surface with a cloth soaked in water. Open the windows, ventilate the room for half an hour.
6. Soda. Drinking soda kills the fungus right away. Prepare a solution of 120 gr. bulk product and 350 ml. water. Stir to dissolve the granules. Moisten a rag as a part, walk through the moldy areas. Try to wipe off the fungus. If it does not give in, apply gruel from soda and water to complex areas. Wait 20 minutes, remove dirt with dry cloths. Soda does not need additional rinsing if there are no gray marks on the double-glazed windows.
7. Detergents. If you need to remove mold, choose a composition designed to clean plumbing or ceramic tiles. The following products have proven themselves perfectly: Silit Beng, Domestos, Sarma, Amway, Mr. Proper, Vanish, Eared Nanny. At the pharmacy you can buy disinfectants, such as NEOMID, BIocid, Clotrimazole, Candide.
8. Ether of tea tree. Many housewives use all kinds of natural oils that kill the fungus. Buy tea tree, rosemary, geranium or patchouli ether at the pharmacy. All of these funds have bactericidal and disinfectant properties. Mix any oil with table salt in equal amounts. Rub into porridge, distribute in areas with mold lesions. Rinse off with plain water after half an hour.

Preventive actions

1. To minimize the formation of fungus, you need to maintain a microclimate in the room. The humidity level should not rise above the 35% mark. In this case, the optimum temperature is considered an indicator of 20-22 degrees.
2. Eliminate sources of high humidity. These include possible leaks at the joints of sewer pipes, frequent drying of clothes in the room, and the accumulation of indoor flowers.
3. Install a system that can condition and ventilate the air. If this is not possible, ventilate the room at least 3 times a day for 25-40 minutes (it should not be damp on the street).
4. Modern double-glazed windows are equipped with a handle that controls the window in two positions. In the cold season, often turn the lever up, ventilating the room with a small hole.
5. If mold appears on the double-glazed windows in the kitchen, install a hood. Use the appliance every time you cook.
6. Do not create the soil for the development of fungus in the bathroom. Always use a plastic hood window, and after bathing, leave the door open until the moisture has completely evaporated.
7. Synthetic and dense linen curtains impede the effect of heating radiators. Warm air cannot get into the plastic windows to dry them and remove condensation. Change accessories with a lightweight tulle.
8. Regularly clean windows, frames, slopes and window sills. The procedure is performed at least once a week, if possible - more often. For prophylaxis, use vinegar or baking soda mixed with water.
9. If you notice that condensation often forms on the glass, collect it with a soft cloth. Try to keep double-glazed windows in a dry position to eliminate the likelihood of mold.
10. If windows are installed long ago, check rubber sealants. Perhaps they leak moisture from the street. Once a month, wipe slopes, frames and glass with Anti-mildew.
11. If you have any doubts regarding the correct installation of windows, isolate the cracks under the windowsill or along the frame. For these purposes, use sealant or foam.

Remove the foci of high humidity, it is necessary to inspect the structure, if necessary, insulate it with foam and treat it with a composition with the “Anti-mold” effect. Remove black spots with tea tree oil, copper sulphate, soda, vinegar, bleach, and targeted detergents. Follow preventive measures, wipe dry windows more often.

Video: how to get rid of mold folk remedies