How to wash linoleum after repair: useful tips

To clean linoleum with maximum benefit, it is worth considering the type of pollution. Long-term practice of specialists at the moment allows you to get rid of troubles without problems. It is important to choose a directional product depending on the composition of the pollution. If you follow simple instructions, the problem is solved in a few minutes. Let's consider everything in order.

How to get rid of cement and whitewashing

1. If you started a repair, and there is no need to change linoleum, you need to protect it with newspapers or film. Unfortunately, even such measures are not always 100% effective.
2. Dust and all kinds of waste can stain the coating. Even in small amounts, such pollution will spoil the pristine look of linoleum. Regular means, unfortunately, are not able to cope with the task.
3. Do not despair ahead of time. The original type of coating can be easily restored if the procedure is carried out correctly. The main thing is to adhere to practical tips and use the recommended means.
4. Before starting the manipulation, prepare a simple solution of 100 g. table salt on a bucket of hot water. Stir in 60 grams of liquid. shavings of laundry soap. Wash the floor thoroughly with the mixture.
5. The use of hot water is prohibited. Otherwise, heat can destroy the vibrant color of linoleum. It will not be possible to return the coating to its previous state.
6. Some craftsmen stick tape to the linoleum with tape. The protective effect from the repair is quite good, but there is a significant risk that the tape is removed when the tape is peeled off. Adhesive tape is glued to the skirting boards, if you will restore them, you can use a similar technology.
7. If the situation is not subsequently corrected, dust will stick to the adhesive from the adhesive tape. After a few weeks, an impressive layer of dirt will accumulate, which is difficult to remove without consequences. In extreme cases, the skirting board will have to be updated.
8. After you have washed the floor with the recommended solution, wipe the linoleum with a fresh composition. To do this, change the water and mix a few crystals of potassium permanganate to it. The chemical should completely dissolve. In the course of the manipulation on linoleum there will be no stains.
9. If you are unable to get rid of the problem in the manner described above, it is recommended to wash the floors again with clean water. Only in this case you need to mix 50 ml. kerosene.
10. The only negative can be considered that after the procedure, a rather unpleasant odor remains. To get rid of it, prepare a light solution with vinegar. Leave the room to ventilate.
11. After that, carefully dry the linoleum. The result should be fixed by polishing the surface with a woolen product. To achieve maximum shine, a small amount of linseed oil should be applied to the fabric. The surface will take on its original appearance.

How to remove polyurethane foam from linoleum

1. Before puzzling over the removal of already frozen foam, it should be remembered that it is washed off much more fresh. Try to continue to prevent such an outcome of events.
2. To date, there are many professional-grade tools that employees of cleaning companies have successfully used. With the help of such cosmetics, you can easily remove the foam from linoleum.
3. First, try to cut off the “cap” of the frozen foam with a clerical knife, then soak the remaining stain with a choice of “Wa-Lin”, “MELLERUD”, or “Sun Wedge”. Follow the instructions, do not exceed the specified exposure time.Then wash the surface with water and dry.
4. There are also special products that dissolve hardened foam. They can be purchased at construction markets or stores of an appropriate orientation. Among these compositions, choose one of the following: Cosmofen, Penosil, Bartons Sleep-off. Read the instructions carefully before use.
5. In the fight against frozen mounting foam, follow clear rules. Do not attempt to remove the compound with acetone, industrial solvent or alcohol. All your actions will lead to even more hardening and absorption of foam in linoleum.
6. Even if at first it seems that everything is removed, after drying, matte spots will appear on the surface, which will be very striking. The same effect is observed on the laminate.

How to get rid of primer stains

1. If the spots from the primer are fresh, removing this kind of contamination is not difficult. To do this, resort to using a soft cloth. Collect the solution with the product, and then wash the coating. If the composition had time to harden, the procedure would be complicated.
2. The method of removing primer from linoleum is similar to removing mounting foam. Before washing it, the top layer should be carefully scraped off. After that, use a special compound such as White Spirit.
3. If you stained linoleum with fucorcin, you should not be upset ahead of time. Bright raspberry-colored stains can be rubbed off. To do this, use tooth powder. The composition must be combined with alcohol. Put the pulp on the stain and wait for it to harden. Remove the product and repeat several times.
4. You can use another no less effective way. To do this, you have to use means for the toilet with chlorine content. It is strongly recommended that you pre-test. Otherwise, the caustic composition will irreversibly ruin the linoleum.

Practical tips

1. If at the time of the repair you were prudent and pre-covered linoleum with a special film, then after completion of the work, special efforts are not required. Just wash the floor with a special solution or soap and water.
2. Before any cleaning work, you must first sweep or walk through the linoleum with a vacuum cleaner. Otherwise, abrasive particles on the floor may damage the coating.
3. There are special tools for washing linoleum. Choose for yourself a suitable option from the proposed ones: “Mr. Proper”, “Domestos”, “Force Bang”, etc.
4. Do not use compounds that can deform the material when washing linoleum. These include bleach, and other “hard” products of this kind.
5. When the floor cleaning is complete, wipe it with a dry microfiber cloth so that there are no stains left. Or let the surface dry by opening the windows.

Before carrying out repairs, it is advisable to cover the linoleum with a special construction film in advance, which is sold in the appropriate store. If these steps have not been performed, use the above methods. Consider how foam, primer, whitewash and cement mortar are removed from the surface of linoleum.

Video: how to wash the apartment after repair