The content of the article
The green spill spilled on linoleum is a real misfortune for any housewife. Many people know that the emerald-colored solution has the unpleasant feature of eating into the surface in minutes. As a rule, it is rather difficult to remove from the coating structure, especially for old spots. You can not remove the stain with ordinary water and a sponge, a more radical approach is required here. Experienced housewives through trial and error brought effective home remedies that will help to cope with the problem. Consider the methods in order, highlight the main aspects.
How to remove greenback from linoleum: first steps
- If you just dropped the bottle with the green stuff on the floor, the first thing you need to do is collect the leftover coating. Otherwise, the emerald preparation is firmly eaten, it will be much more difficult to remove it.
- Any improvised products that are capable of absorbing moisture will help absorb the remnants of the product. It can be gauze, cotton, old rags, in extreme cases, toilet paper. Do not smear the brilliant green on the surface, spot blot the preparation, not allowing it to creep to the sides.
- Next, you need to prepare a solution. Wear gloves, protect your airways and eyes. Pour warm water into the basin, add a cap of bleach or any other caustic bleach. If desired, you can replace the product with laundry soap, previously grinding the bar with a grater.
- After preparing the solution, moisten a sponge or a hard rag, begin to rub the stain intensively. Try to make the track dull, as inconspicuous as possible. After that, put gauze in 5-6 layers, soak it with hydrogen peroxide, apply to the place of contamination, squeeze. Wait about 10 minutes, then remove the cloth and wipe again with mint soapy water.
Effective ways to remove greens from linoleum
Hydrogen peroxide
One of the common ways to remove greens from the surface of linoleum is the use of hydrogen peroxide. The main thing is that the concentration of the drug is not lower than 6%. If desired, peroxide can be replaced with “Chlorhexidine”, which is sold in a pharmacy.
To get the emerald trail out, prepare an old piece of terry towel. Soak it in the preparation so that the liquid drains. Place the fabric on the stain, leave for 10 minutes.
After the indicated period, the trace will brighten, carry out the previous manipulations as many times as necessary. During processing, the coating will lighten, so you need to wipe not only the stain, but also the area around it (so that no transitions are visible).
Acetone
Take pure acetone, moisten a dense piece of cotton wool in it, then begin to process the stain with wetting movements. Change cotton wool as it gets dirty, do not press hard.
Nail polish remover
If it is not possible to purchase acetone, use the nail polish remover that it contains. Effectively remove any kind of contaminants as follows: soak a dense cloth in the solution, attach to the stain, press, leave for 25 minutes.
After the specified period has elapsed, lightly rub and blot the stain, evaluate the result. Treat the contaminated area, starting from the edges, gradually moving towards the center.
Potassium permanganate and table vinegar
Mix potassium permanganate with vinegar (concentration 9%) so that you get a raspberry-colored solution. Soak gauze or a clean rag in the prepared preparation, treat the stain well (do not smear it!).
After such manipulations, the trace from the green will turn pink, at this point you need to repeat the procedure again. The stain will turn brown, wipe it with a clean cloth dipped in hot water, and dry with paper towels.
Ordinary hydrogen peroxide with a concentration of about 6% will completely discolor the contaminated area. Dampen cotton or rag in the preparation, attach to the stain and squeeze. Wait 2-3 minutes, evaluate the result. Re-bleach if necessary, replacing a dirty cloth with a clean one.
Baking soda and vinegar
Due to the chemical reaction obtained using drinking soda and ordinary table vinegar, the brilliant green will dissolve and partially discolor. Prepare porridge from the listed components so that the composition is enough to cover the stain several times.
Spread the mass with a very thick layer, cover with a cling film or bag on top, leave for 5 minutes. Soda will begin to pull the green stuff, so the pulp needs to be updated periodically.
To completely discolor the contamination, repeat the procedure as many times as the situation requires. At the end of all manipulations, moisten gauze in vinegar and thoroughly wipe the surface.
Camphor alcohol
Before starting treatment of the stain with camphor alcohol, clean the contamination with soapy water and wipe it dry. Next, moisten a large piece of cotton wool in the product, begin to intensively rub the trace from the greens. Change cotton wool as you use it; it should always be clean.
As in the case of peroxide, it is not enough to process only the stain. Wipe the entire flooring so that the boundaries of the brightened area and the shade of the coating do not differ much. Finish cleaning the surface by wiping with a cloth dampened in vinegar.
Automatic powder
To prepare the composition, you will need to take a “machine gun” powder with bleaching particles. Prepare a paste-like mass from a loose composition and water. Distribute the gruel on the surface of the stain, rub well and cover with cling film, leave for several hours (if possible all night).
After the specified time, remove the residues with paper towels, prepare a soap solution. Grate a third of the bar of laundry soap, dilute it in boiling water and cool. Soak a rag in the resulting composition, wipe the linoleum.
Ethanol
Ethyl alcohol, also known as medical alcohol, is used to remove stains of varying complexity (coffee, wine, fuel oil, rust, etc.). For this reason, it makes sense to consider the cleaning technology in more detail.
Dip the cheesecloth in 5 drops in medical alcohol. Go through the pollution, try to remove the stain as efficiently as possible. Start cleaning from the edge, gradually move towards the center.
When you notice that the trail is much brightened, moisten an old towel in alcohol and attach it to the stain. Leave for 2 hours, periodically evaluating the result. The contamination should become colorless, follow the steps until you achieve the desired effect.
Bleaching powder
The drug belongs to effective disinfectants, it can be purchased in supermarkets, hardware stores and even a pharmacy. For cleaning, a product in the form of a powder will be required.
The composition must be diluted strictly according to the instructions. He easily removes the stain from the green, but the smell of chlorine is quite specific. Before the procedure, it is recommended to remove children and animals from the premises, as well as open all windows.
Dilute the drug, apply it on a contaminated surface, wait 7-10 minutes (the exact interval is indicated in the instructions).At the end of the term, the coating must be thoroughly washed several times, then wiped dry.
Dentifrice
Prepare a pasty mass by mixing the tooth powder with running water. Spread the composition over the contaminated area, wait 2 hours. Rub the grease stain with an old brush, evaluate the result.
If the result did not satisfy you, dilute the powder with a vinegar solution from 6 to 9%. Clean in the same way. After all the manipulations, wash the floor in the usual way.
Salicylic alcohol
An effective tool that copes with any kind of pollution. To remove stains of greens, it is necessary to use only pure salicylic alcohol, without diluting it with water. Moisten an old rag in the composition, intensively wipe the areas affected by greenery for 10 minutes.
If you are not satisfied with the result, do otherwise. Soak a large piece of cotton wool in salicylic alcohol, attach it to the coating, leave for 1 hour. Now prepare the solution by diluting the shavings of laundry soap in water. Wipe the floor with a sponge dampened in the resulting composition.
Stain remover
The most popular and at the same time effective drugs are Antipyatin, Minute, Sarma, Ecover, Vanish, Amway, Domestos, Eared Nanny, Edelstar.
To properly use the composition without causing damage to the coating, apply it to a stain and wait half an hour. Then wash the linoleum with clean water and any flooring treatment. Repeat if necessary.
Zielonka is a complex type of pollution, therefore it is necessary to use effective means. Use hydrogen peroxide, acetone, nail polish remover, potassium permanganate, table vinegar. Do not forget about ethyl, camphor, salicylic alcohol, automatic powder and bleach.
Video: how to wash green from skin
Submit