How to clean mold from clothes: 11 ways

Mold is a microscopic fungus that propagates preferably in a warm and humid environment. Tumors on the tissue are gray, green and black. The darker the composition, the deeper the mold has eaten into the structure of the fabric. If you notice a fungus on your favorite thing, do not rush to throw away the product. We have compiled for you a collection of effective methods that perfectly fight the smell and remove stains from the affected areas.

Causes of mold

• incorrect storage (insulated bags / boxes, damp rooms / cabinets);
• improper drying;
• contact with the affected product.

Effective ways to remove mold

Onion and lemon
Peel 2 large onions, grind them in a blender until porridge forms. Squeeze the juice from 2 lemons, pass the zest through a meat grinder. Combine all components into a homogeneous mass. Lay the product on a flat surface, apply gruel to the affected areas locally, cover with a cling film or bag from above. Leave on for 25-30 minutes, then remove the mixture. Send the product to the machine, add more powder and conditioner, set the desired temperature mode (see the label on the inside of the product). Do not worry about the smell of onions, lemon will completely neutralize it. Dry your clothes outdoors.

Milk and Borax
The method is good in that it is suitable for delicate fabrics. Combine in equal amounts (50 gr.) Non-fat milk, borax powder, table vinegar and lemon juice. Apply the mixture to separate areas, cover with cling film, wait 40 minutes. After time, blot the composition with cosmetic discs, wash the item with your hands several times.

Whitening products
In specialized stores, universal bleaches are sold that are suitable for all types of fabric and any color of clothing. The most common are Vanish and Domestos. On the back of the product indicates the exact exposure time and amount of application of the drug. The technology is quite simple: cover the affected areas of the fabric, wait a certain time, then do a hand or machine wash.

Kefir
Oddly enough, a microscopic fungus can be removed using fermented milk products (kefir, yogurt). Apply a large amount of product to the area with mold, leave for 7-10 hours. After this, rinse the thing with your hands, evaluate the result. If necessary, repeat the procedure, complete the removal of the fungus by machine wash.

Laundry soap

The technique is designed to remove mold from the surface of colored and white things. To prepare the solution, grate a half of the bar of laundry soap on the grater (the concentration of the active substance should be in the range of 60–72%), then pour chips with 1.3 liters of warm water. Stir, wait for dissolution, soak the thing, leave for half an hour. To process white things, it is recommended to increase the amount of soap to 2/3 of the bar. After soaking, wash your clothes with your hands or use the machine.

a piece of chalk
Chalk is famous for its absorbent properties, it is not necessary to prepare the composition using aggressive agents. We use dry processing of the fungus, the technique is suitable for cotton products. Grate the chalk or grind in another convenient way. Sprinkle moldy areas, cover with a landscape leaf on top. Turn on the iron, wait for heating, then iron the item for 10 minutes. Shake off the rest of the chalk, put the clothes on the machine and turn on the intensive mode.

Ammonia
Take a test to see how the fabric behaves. Apply ammonia to a cotton swab, treat a small area, leave for 20 minutes. If everything is normal, proceed to remove mold. Cover the affected area with a small amount of ammonia, wait 10 minutes. Rinse the item with clean water. If the result is incomplete, carry out the procedure, observing the exposure time.

Chlorine-containing preparations
The method is suitable for removing mold from white things from natural fibers, which are amenable to high-temperature processing. Perox, White, and Domestos bleaches have proven themselves well. To prepare the solution, dilute bleach at a rate of 30 ml. 1.2 liters of cold water. Put on the stove and simmer for 15-20 minutes. At the end of the procedure, you must immediately remove the product and wash it in a machine with the addition of bleaching powder. Drying after using chlorine-containing products should be carried out on the balcony away from direct sunlight.

Vinegar
Do not confuse acetic essence with a solution of acetic acid, they have a completely different concentration. In order to remove mold by this method, you will need table vinegar, in which the concentration of the active substance does not exceed 9%. Pour 1 liter of warm water into the basin, pour 45 ml. vinegar and 25 ml. glycerin, soak clothes, wrap the container with cling film, wait 25 minutes. You can also process the thing locally, while it is worth increasing the exposure time by 5-10 minutes. After soaking, rub your clothes with tar or laundry soap and send to the machine. Dry in the shade in the fresh air.

Boric acid

The product is available in liquid form in the form of an alcohol solution. To prepare the composition for removing mold, it is necessary to dilute 35 ml. boric acid in 1 liter of water, after which apply the product to separate sections of the product. If a large area is affected, soak the whole thing. Leave on for 1 hour, then wash clothes with your hands and rinse in the typewriter. Boric acid not only removes mold, it penetrates deep into the structure of the tissue, preventing the further appearance of the fungus. If the result is incomplete, repeat the manipulation.

Turpentine
Dampen a cosmetic swab in turpentine, wipe the mold-infected areas. Sprinkle on top of fragrance-free baby talcum powder or white cosmetic clay. Cover with a sheet of glossy paper, turn on the iron and iron the product for 7-10 minutes. Remove excess from clothes, machine wash with rinse aid. The method is suitable for white and colored things from any kind of fabric.

Preventive actions

1. After you iron your clothes (especially when steaming), do not send them immediately to the closet. Wait 15-20 minutes for the product to dry completely.
2. Do not rush to put clothes in the dresser, first make sure that the shelves are dry.
3. Leave a place for air circulation in the cabinet, do not fill it whole.

Before using the above products, test on an inconspicuous area of ​​the product, especially for colored, woolen and delicate fabrics. If things dry in the bathroom, which suggests moisture, hang them in the sun or on a dryer in the room.

Video: how to get rid of mold in a linen closet