How to clean silver fox fur at home

A silver fox is the fur of a black and brown fox, which is quite difficult to find in the wild. The silver fox fur is highly regarded for its color - it shimmers with three different shades. The silver fox is very soft and pleasant to the touch. Fur coats, vests and hats from this fur are incredibly warm, they can be worn even in the most severe frost. However, most women appreciate the silver fox for the personification of luxury, wealth and chic.

However, it is not always possible to save the fur product in the form that it came to you from the store. With each toe, the silver fox fades, the fur becomes faded, gives yellow. If you wear it inaccurately, spots may appear on the fur that are not easy to remove. In addition, from the inside, the product is contaminated with greasy traces. The easiest way to clean a silver fox is to give the coat a dry clean. However, you can clean the product at home.

How to brush up silver fox fur

If there is no obvious dirt on the fur, you can refresh the product with semolina, starch or baby powder. Lay the product on a flat surface, such as a table. Lightly heat the talcum powder, starch or cereal in a pan. After that, evenly sprinkle the fur with a hot bulk composition. Try to make the powder penetrate the most inaccessible places - the very base of the fur. This will clean the product as best as possible. You can even rub the fur coat with your hands, imitating a hand wash.

Semolina, starch or baby powder is an excellent adsorbent material that absorbs moisture, dirt, dust, grease. After the bulk composition absorbs everything unnecessary, the fur coat will need to be thoroughly cleaned of white powder. To do this, shake the silver fox, knock it out with a stick, comb it with a comb, walk through it with a vacuum cleaner with a special nozzle. You will notice that the knocked out white powder has become gray and dirty - it can be used to judge the degree of contamination of the product.

How to clean silver fox fur

If the fur is very dirty, wet cleaning cannot be avoided.

1. Prepare a warm soapy composition from liquid soap or gel. It is not recommended to use solid soap and powder, as small particles can get stuck between the villi of the fur and get them out of there will be difficult.
2. Wind a piece of light, clean cloth onto the brush. Moisten the device in water and walk it all over the fur. Try not to wet the fur very much, but do not leave it completely dry.
3. The inside of the product can be cleaned simply with a brush, without winding the fabric. Thoroughly clean dirty and greasy areas. Usually, the cuffs and collar on the inside are most contaminated on the fur coats. The hats are strictly dirty from the forehead - in the place of contact with the skin.
4. After that, wipe the fur of the product with a clean damp cloth so as to rid the pile of soap traces. The inside can be thoroughly washed or washed. But be careful - wetting the fur is highly discouraged.
5. When the villi of the fur cease to be soapy, they can be dried. Drying the product involves hanging it in a draft. Do not forget to hang the fur on your shoulders. In no case should you dry natural fur products near heaters, in direct sunlight, and even more so, near an open flame.
6. Sometimes it can take more than one day to completely dry the fur and thick lining.

If you plan to clean the silver fox after storage until the next season, dry it especially carefully so that it does not become damp in the cupboard.

We clean the silver fox from stains

Sometimes difficult hard-to-remove spots may appear on the fur coat, which are not so easy to cope with. In this case, we have saved for you several secrets that will help to clean the fur without difficulty.

1. Petrol. Remove stubborn stain with gasoline. However, only refined, transparent gasoline, which is sold in hardware stores, is suitable. Moisten a small piece of bandage in it and wipe the stain. If the contamination does not go away immediately, leave the bandage soaked in gasoline on the stain for 10 minutes. After that, there will be no trace of dirt.
2. Hydrogen peroxide and ammonia. The following recipe will help rid the silver fox from yellowness. Dissolve a tablespoon of hydrogen peroxide and a teaspoon of ammonia in two glasses of water. Thoroughly mix the composition and apply a small portion of it to the inner fur trim. So you can check the reaction of the fur to the cleaning agent. If the result pleased you, go through this composition on all the yellow spots of the product. Use a sponge, rag or sponge for this. After this treatment, simply wipe the fur with a damp cloth - there will be no trace of yellow spots.
3. Kerosene and chalk. These ingredients will help you get rid of complex grease stains. Grind clerical chalk and mix it with pure kerosene. Apply cooked gruel to contaminated areas. After 5-10 minutes, the gruel can be removed, and the pollution wiped with a cloth. Kerosene gently corrodes the ingrained fat, and the chalk absorbs it immediately.
4. Alcohol. You can get rid of stains of paint and ink with alcohol. Dampen a cotton pad in rubbing alcohol and gently wipe it with dirt. If the paint does not come off, leave a disc moistened with alcohol on the stain. After a while, wipe the dirt again. However, be careful - excessive friction can damage the pile.

All these recipes are not only effective, but also easy to use - the ingredients for cleaning can be found in any first-aid kit or hardware store.

No matter how we try to protect expensive fur products, no one is safe from pollution and incidents. Our recipes will help you quickly and efficiently remove stains and refresh the fur at home, without resorting to expensive dry cleaning services. And then your silver fox will always look expensive, stylish and luxurious!

Video: how to clean silver fox fur