How to wind hair in a curling iron

To date, the most popular tool for creating curls is considered to be an electric curling iron. She replaced the iron rods, which previously had to be heated.

Method number 1. Cone Curling Iron

The device is a forceps in which the diameter narrows toward the end. The cone type curling iron allows you to make curls that look as natural as possible. The device does not have a clip that fixes the ends of the strands. When using a curling iron, use gloves with thermal protection. So you will not get a burn of the skin of the hands when you hold the curls.

Option number 1. Classical wave

1. Comb your hair the entire length using a massage brush with natural bristles. Then, separate a section of hair with a comb about 4-5 cm wide.
2. The size of the curls depends on the size of the strands. Now lift the curl with your fingers at the end, set the curling iron with the wide part to the basal area.
3. Carefully wind the entire length of the strand on the fixture, the ends of the hair should be on the narrowed part of the cone. The procedure is more convenient to carry out if you hold the device diagonally in relation to the head. Point the tips up.
4. After wrapping, count to 5, then carefully remove the curling iron. Evaluate the result, let the hair cool. Repeat with all remaining hair, changing the width of the original lock to get a natural curl.

Option number 2. Wave in small waves

1. Make sure your hair is dry and clean. Then comb them from the tips to the roots using a massage brush. Separate a 1.5 cm curl. Twist the lock into a not-so-tight flagellum.
2. Lift the treated area of ​​hair up, holding the tip of your fingers. Bring the wide part of the cone curling iron to the root area from below, screw the rest of the length onto the fixture.
3. Similar to the technology above, the tip of the curl should be located at the narrow part of the cone. Count to 7, then remove the appliance. Evaluate the result, carry out manipulations with each strand separately.

Method number 2. Automatic curling

Curling irons of the automatic type suggest the presence of rotating spirals, which independently wind the strands and at the output curls of different thickness and diameter are obtained. The final result directly depends on the temperature of the curling iron, the width of the original curl, the direction of the curl, and the exposure time. All parameters are set independently.

Curling technique (curling "BabyLiss")

1. Connect the instrument to the mains, wait for heating to the set temperature. Set the curling direction and styling time using the special lever.
2. Comb the whole mop, then separate the lock and once again go over it with a massage brush with a natural pile. Pull the curl, open the appliance door, bring the device to the root zone.
3. Close the curling iron, press the "Start" button. You will notice how the length of the lock is wound onto the tool rods and hidden in the instrument box. When the curling iron signals a completion, release the lock by opening the casement.
4. To get a salon result, choose the direction of winding correctly. There are 2 main types - “to face” and “on behalf of”. Do not change the position so that the hairstyle does not look chaotic.

Method number 3. Corrugation Curling Iron

There is a tool for curling hair, which has a nozzle "corrugation". This type of curling iron is presented in the form of two plates, which on the inside have a zigzag convex texture.A lock is inserted between the clamps, and small waves are obtained at the output (as after weaving thin braids).

Curling Technique

1. Wash your hair using conditioner balm. Dry the hair 100%, then comb. Separate the strand with the width matching the length of the tongs.
2. Heat the curling iron. Lay a flat curl between the two clips at the root zone. Count up to 5-10 seconds. The duration depends on how sharp the waves you need to get.
3. Then lower the curling iron down on the same strand so that there are no gaps between the processed and processed areas. Again, count to 10. Proceed in the same way until you reach the ends.
4. If you do not wish to receive a magnificent hairdress, then go with crimping tongs only along the upper part of the hair. You can also work out individual curls, creating a gentle image.

Method number 4. Round curling iron

Round curling iron refers to the classic type of tool. The working rods are in the form of a cylinder, the device is equipped with a clip that fixes the ends of the hair. Depending on the diameter, the curling iron can have a value in the range of 10-50 mm., This affects the size of the curls. The most common are curling irons, the cross section of which is 20–25 mm.

Option number 1. Small curls by vertical curling

1. Separate the curl with a curl whose thickness does not exceed 5 cm. Comb the lock, lift by the tip, observing a right angle with the head.
2. Without unclenching the tongs, swipe the entire length of the lock with a hot tool. Move from the root area to the tips. When the hair warms up, pinch the end of the strand.
3. Hold the tool upright. Twist the lock by turning the hand to the very roots. Count to 6 seconds, loosen the compression force, remove the tool.

Option number 2. Round curls by horizontal curling

1. Prepare your hair first. Make sure they are clean and combed. Separate the curl, the width of which will be 3-4 cm. Lift it up, walk with a hot tool from the roots to the ends.
2. Grasp the forceps at the end of the strand, fixing it. Raise your hand so that the curling iron is horizontal. Wind the curl to the root zone from the face or towards it.
3. Count to 10 seconds, free your hair and let it cool completely. Do not touch hot strands so that they do not fall apart. After cooling, you can divide the treated area into several sections and sprinkle with varnish.

The subtleties of creating curls on hair of different lengths

It is known that long hair is harder to wind than medium or short. Difficulties are caused by the severity and size of the strands that are not warming enough. On the other hand, a perm for long hair is not suitable for owners of a short haircut. Hence the need to consider the intricacies of the procedure.

Short hair

1. Choose a cone or round curling iron with a diameter of no higher than 27 mm. The ideal option is a tool with an indicator of 15-23 mm.
2. Separate the locks with a width of not more than 3 cm. During the curl, back out from the basal region by 3-5 cm.
3. To create elastic curls, grab the tip of the curl with the tool, hold the curler vertically or horizontally, wait 12 seconds.
4. To get naughty waves, squeeze a lock in the root area, scroll down the curler down to the tips gradually.

Medium hair

1. If your hair is up to the shoulder blades, choose a curling iron with a diameter of 18-24 mm. Separate the locks with a width of 3-5 cm.
2. While curling, keep the curler on your hair for at least 10 seconds. After the procedure, curl the curl into a bagel and pin it to the basal part until it cools.
3. To curls do not puff up in all directions, fix the tip of the curl and twist the strand onto the curling iron to the middle of the length or slightly above it.

Long hair

1. If you are a happy owner of long hair, choose tools with a diameter of more than 25 mm.The complexity of creating a hairstyle lies in a large expenditure of time.
2. Long curls do not warm well, so separate thin strands (about 2-3 cm.). Wind them on the curling iron, starting from the tips. The duration of fixation is 25 seconds.
3. After you create a curl, twist it into a bagel and stab it with invisibility. Lock until completely cooled.
4. If you want to get large curls, experts advise you to recede from the roots of 10-12 cm. So the curls will look natural, the fixation is enough for a long time.

Precautions when working with the curling iron

1. In order not to harm the mop, adhere to safety rules. Do not use forceps more than 2 times a week, preferably less often.
2. Do not try to immediately turn on the instrument at high temperatures in order to shorten the duration of the procedure. For weakened hair, it is recommended to set the mode to no more than 100 degrees. For everyone else, an indicator of 200 degrees is suitable.
3. Carefully read the instructions for each method of curling. It details how long it is necessary to withstand the tool on the hair. Do not exceed this duration.
4. Do not try to wind the strands more than 2 cm thick. After laying, they will fall off almost immediately, and you will waste time.
5. If you do not have a curling iron, but have a desire to buy it, do not chase the cheapest device. Prefer professional forceps to keep your hair in order.
6. To obtain large curls, it is necessary to keep the curling iron in a horizontal position. In this case, the initial locks should not be too thin. To obtain pronounced spiral curls, the device is held in an upright position.
7. Some girls practice curling not the entire length, but only the ends. You can also wind your hair by first collecting it in a ponytail. Such styling will make the image romantic.

Light curls, sexy waves, romantic curls, large elastic curls - these and other styling options can be realized with the help of an ordinary hair curler. There are many tongs that will allow you to curl on strands of different lengths.

Video: how to curl hair with a curling iron