How to use pumice for feet

Pumice consists of volcanic lava and water, as a result of this combination bubbles form, which subsequently congeal. For a long time, such a device has been used as a removal of keratinized particles. Girls and women use pumice to clean their feet, in particular to give the skin smoothness by cutting corns. In addition to cosmetology, pumice is often used in industry. Sandpaper and other abrasive materials are prepared on its basis. However, we are interested in the first option - cosmetology. We will analyze the important aspects in order.

Pumice for legs: features

1. As mentioned earlier, pumice refers to stones of natural origin. Some ladies mistakenly believe that they can replace it with a spatula with attached sandpaper, but this is far from the case. Since there are more holes in the pumice, they absorb the removed skin. After thorough washing, the appliance becomes usable again.
2. The main purpose of pumice is to make the skin of the feet dull and smooth. The product is widely used at home, it perfectly cleans rough corns. In some cases, the device removes corns and cracks, however, it is required to use it in combination with a cream (simultaneous exfoliation and moisturizing).
3. The disadvantage of conducting a pedicure using pumice is the fact that it will not be possible to achieve a momentary result. The effect is achieved after 3-5 procedures. This feature is characterized by the relative softness of the porous compound, as a result of which it is possible to clean not only coarse corns with pumice, but also to make a light massage.
4. The maximum effect of using pumice is achieved after daily use. When you achieve the desired result, it must be maintained by peeling 1-2 times a week. Of course, it all depends on the individual characteristics of the feet. For some ladies, three procedures are enough and the subsequent maintenance of the effect every 2 weeks.
5. Pumice stone has an unpleasant feature to quickly wear off, especially with regard to artificial specimens. Change the instrument at the moment when it ceases to fulfill its main function - full exfoliation. Typically, the product requires replacement after 2-3 months of use.

How to choose a pumice for the feet

1. Today it is difficult to find pumice for feet of natural origin, in most cases, manufacturers supply synthetic stone to store shelves. Its disadvantage is low efficiency, the presence of sharp elements, brittleness. Devices of this kind are quite light in weight, as a rule, there is a brush on the back.
2. If possible, make a purchase in the markets. In such places, pumice is sold without packaging, has no marking, but is heavy and dense to the touch (natural composition). Pay attention to the size of the product, pumice should fit tightly in your hand. A well-made pumice should have small pores, they provide the proper cleansing.
3. Inspect the product for defects. It is important that the cavity has no damage (sharp corners, large holes, loose composition, etc.). The advantage will be the presence of a cavity with a handle to which the stone is attached. Some manufacturers insert a string into the pumice, this move greatly simplifies the use.
4. As we mentioned earlier, natural foot pumice is preferable. Due to the unique composition, the device can be used for allergy sufferers. Pumice made from volcanic rocks does not leave skin irritation.It also does not cut the epidermis, causing wounds.
5. The disadvantages of natural pumice include the complexity of care. If you are used to cleaning the heels in the bathroom, after applying the stone should lie down for a long time to dry. Because of its composition, pumice quickly absorbs water, creating the soil for the growth of bacteria. For this reason, people with a foot fungus should carry out the procedure with caution, observing hygiene standards.
6. If we talk about artificial pumice, it is not forbidden to use it. To date, store shelves are filled with such devices. Insufficiency is considered a minus, the stone crumbles a lot, breaks and often causes irritation. However, bacteria do not multiply in the structure, artificial pumice dries quickly.

Rules for using pumice for feet

To make the pedicure as effective as possible, remember the basic rules for using the device.

1. It is not recommended to rub pumice too sensitive, thin and dry skin of the feet. In this case, the procedure is carried out only on wet heels, previously steamed in the bath. To properly prepare the solution, use medicinal plants (chamomile, sage, bark of birch or oak, geranium, etc.). Many housewives prepare baths based on ordinary shower gel and sea salt. To remove the yellow color of the skin, hydrogen peroxide is added to the water (about 30 ml. Per 1 liter of liquid).
2. The main purpose of pumice is the removal of coarsened (problem) areas. For this reason, you should not treat the entire foot as a whole, unless you want to make yourself a massage (light movements). When the skin is pre-steamed, walk through it with neat circular, not linear, movements. Otherwise, deep stripes will remain in the skin cavity.
3. Pumice should be used until the skin begins to pinch. In no case do not bring the procedure to abrasion of the epidermis (thin, red, translucent dermis on the feet). If you have long neglected the peeling procedure, use pumice stone daily. When the desired result is achieved, maintain it as necessary.
4. To reduce the sensitivity of the skin to hosiery and hosiery, shoes, rinse the skin with melt water right away the procedure field. Then apply a special gel for the feet, which will moisturize the feet for a long time. After the pedicure, spend some time in socks until the cream is completely absorbed.
5. If we talk about modern electric pumice (such as Scholl), it is used on dry skin. However, such devices are 12 times more expensive than mechanical ones (stone), instructions are attached to them. Follow the manufacturer's recommendations for maximum results.
6. Many new mothers face the problem of skin care of the feet after childbirth. During pregnancy, it is difficult to process the heels, especially in the third trimester. Also, with the birth of a baby, a woman notices that the skin begins to crack and dry very much. To bring the legs in proper condition, you need to soak the skin, grease it with cream, and then proceed to remove the coarse cells.

Technology of using pumice for legs

There are basic steps that you must follow when using pumice stones for your legs. This includes steaming the skin, treating coarsened cells, cutting and shaping the nails, applying cream. We will analyze the steps step by step, highlight the main aspects.

1. The first step is to steam the feet so that the dead particles are easier to exfoliate. To do this, draw warm (almost hot) water that your legs can carry. Add essential oils, liquid soap, or hydrogen peroxide. You can prepare a decoction of medicinal plants, and then use it for its intended purpose. Some housewives add corn or potato starch, sea salt.It all depends on personal preferences. Keep your feet in the bath for at least half an hour, periodically adding hot water.
2. After steaming, remove one leg from the bath and dry it with a bath towel. Start rubbing the problem areas with pumice in turn. To clean the instrument, dip it in water and rinse. Re-treat the coarsened areas, proceed to the other leg. Rinse off residues from the skin so that they do not clog the pores of pumice. After that, trim the nails, sand them, shape. When the procedure comes to an end, wash your feet with clean water, apply cream and put on your socks.
3. If we are talking about electric pumice, it must be used exclusively on dry feet. The technology is quite simple: turn on the device, walk linear movements along problem areas, brush off the already exfoliated cells with a brush. Repeat manipulations until the desired effect is achieved.
4. It is important to understand that the legs do not belong to the cleanest part of the body. For this reason, tool care should be appropriate. After each use, rinse the pumice with cold water, then scald with boiling water. Some housewives additionally water the device with hydrogen peroxide, preventing the development of bacteria. After washing, leave the pumice to dry completely on the heating radiators or on the sunny windowsill.

Using pumice for legs is not particularly difficult if you adhere to a phased processing. Be sure to steam the skin before rubbing, prepare baths based on medicinal decoctions. After the procedure, apply cream, put on socks, do not neglect the care of pumice. Follow the rules regarding the choice of tool, prefer natural breeds.

Video: how to care for your heels