How to remove traces of tape from various surfaces

Scotch tape has long been successfully used in everyday life for a wide variety of needs. It perfectly holds together, helps to quickly pack a thing, and also insulates windows. In addition, scotch tape is one-sided and double-sided, which expands the scope of its application. But many housewives are constantly faced with traces that remain after this effective fixing material. Often, instead of washing the surface, some just waste time and money. Or even spoil things to which adhesive tape was glued. And all because they do not know what exactly can remove stains without damaging the material.

How to remove traces of tape

Why are traces of tape left

The only drawback of this fixing material is the traces that remain on the surface from its use. Why do they appear? The fact is that the basis of adhesive tape is glue, with the help of which, in fact, it keeps on the surface. The appearance of spots depends on two reasons:

  • from the material to which the adhesive tape is glued;
  • from time.

It is important to understand that the softer the surface, the harder it will be to get rid of the traces later. Glue in such a material is absorbed very quickly. If you stick adhesive tape to cardboard, for example, then after removing it, traces on the surface will be very significant. And on plastic or wood there will be only a barely noticeable trace of glue. A lot of glue remains if the adhesive tape is glued for a rather long time.

How to remove traces of tape from furniture

Often furniture is glued with tape during transportation. It is very comfortable. But after the furniture is delivered, the owner faces the task of cleaning it from sticky traces. There are several ways to do this:

  1. For polished furniture, it is best to use essential oil, which is not suitable for untreated wood. The adhesive tape should be moistened with any oil and left for several minutes so that it gets wet. Then everything is cleaned with a paper towel.
  2. For ordinary furniture, white spirit is suitable, which is likely to stain on a polished surface;
  3. Unpolished furniture can be preheated with a hairdryer, so that later it is easier to erase traces of tape.
  4. If the traces of the tape occupy a small area, you should use a regular eraser. This procedure is very simple - just rub the stain from the tape until it disappears. After that, it remains only to wipe the place with a damp cloth. The disadvantage of this method is only in duration. Therefore, the eraser will not be able to quickly erase the glue.

Often there is a problem with sticky marks from adhesive tape remaining on the upholstery of a sofa or chair. There are several ways to remove them. First of all, you should try to wipe it with a soap solution. If this does not help, then you should take alcohol. In order not to spoil the fabric, it is better to try this method on a small area of ​​the upholstery. Then you can apply the most effective means - a solvent or alcohol. But then again, before using it, you need to test the fabric for strength.

How to remove tape marks from glass and plastic

In order to get rid of traces after using adhesive tape from the glass, just wipe it with a regular window cleaner. This tool can be used not only for window glasses, but also for mirrors on furniture. If there are too many spots, you can use acetone or alcohol. The only thing that they can not be washed tinted car windows.And when using such liquids it is better to wear gloves, otherwise you can seriously damage the skin of the hands.

Recent traces can also be easily destroyed with ordinary drinking soda. To do this, pour a teaspoon of soda with hot water. The result should be gruel. It is applied to a sponge or piece of cloth and rubbed on the glass. In the case when the glue is very old, you can purchase a special tool in the stationery store to remove glue from the glass. If there is nothing but gasoline at hand, then the glue from the glass can be erased with it. This is done as follows - moisten a piece of cotton wool with plenty of gasoline and gently wipe the surface with it.

Traces of tape can easily appear on a plastic surface. There are a lot of items from this material. These are dishes, household items, toys, furniture, etc. Therefore, a stain from glue on them is the most common phenomenon. However, removing them is not at all difficult. There are several methods worth using.

  1. Solvent or gasoline copes well with cleaning plastic objects. But it is important to remember that applying these products on plastic in large quantities is not recommended. It is best to first try applying the solvent to a small area and look at the result. If no changes have occurred, moisten a cotton pad in the cleaning fluid and wipe off any adhesive tape.
  2. For fragile plastic, you can use nail polish remover, as it is more gentle than building solvent;
  3. Sticky stains easily remove ordinary vegetable oil from plastic. And then to get rid of grease stains on the surface, just wipe it with soapy water.
  4. Some housewives use mayonnaise instead of vegetable oil. It also softens glue stains very well;
  5. For small areas of contamination on plastic, you should try a stationery eraser.
  6. In some cases, another tape helps to remove traces of tape. To do this, a new adhesive tape is glued onto the old track and is well fixed. Then it needs to be very quickly and sharply detached from the surface. If there are still spots, the procedure can be repeated several times. True, this method can only work with fresh contaminants.

How to remove traces of tape from a car

If traces of tape were found on the surface of the car, then do not immediately grab the solvent and wash the glue. You should understand what material is made of which sticky spots will be removed. If this glass, then you can try to wash it with detergents. Such traces are well removed from plastic with alcohol or with an eraser.

How to remove traces of tape from a car

It is better not to risk the painted surface of the car using various solvents or alcohol. Otherwise, you can dissolve the varnish and paint. If the traces of scotch tape are “fresh”, then they can be easily erased with vegetable oil. Sometimes it’s more convenient to erase everything with gasoline or kerosene. And for older spots, motorists often use a tool like Profam 1000. In extreme cases, such a problem can easily be handled at the “sink”.

How to remove traces of tape from clothes

On clothes, traces of adhesive tape are less common, but if such a problem appears, then it needs to be addressed. The best way to remove sticky stains from the fabric is to wash. But the water should be very hot, so you should pay attention to whether its fabric will withstand. First you need to wet the stain and gently soap it with soap, preferably household. Next, you need to leave your clothes wet for about an hour, and then wash. The stain should get off.

Another way is chemical solvents. But the tissue should not suffer from this remedy, so it is better to check the reaction on a small piece. There are also special fluids that are used to remove labels from clothing. They are carefully applied to the material and left for 15 minutes. Then it remains only to rinse it in warm water.This tool, like a solvent, can only be used for clothing that does not fade.

An excellent tool that many people use when spots from scotch tape appear on clothing is soda. This product is in any kitchen. It is enough to dissolve a little soda in warm water and soak a cloth in it. For greater effect, it can be applied directly to the adhesive tape and left for a while. Then the thing should just be washed. Often you have to wash the remnants of glue with leather clothes. There are several ways to deal with this quickly:

  • dirt on the skin should be wiped with table vinegar, and then wash it off with ordinary soap;
  • soap solution;
  • remove traces of tape with a cotton swab dipped in solvent;
  • with the help of another adhesive tape - sticking it to a stain and abruptly tearing it off.

How to remove traces of double-sided tape

Double-sided tape is much stronger than office tape, so traces of it are removed much harder. And the material to which the tape is glued can seriously suffer in the process. To avoid this, you should follow simple rules:

  1. If the surface to be cleaned does not deteriorate due to high temperatures, hot air can be used. Contamination must be properly heated with a hairdryer so that adhesive from tape can be wiped off with a rag.
  2. In the case when the material can in no case be very heated, you can try to erase the stains with vegetable oil. To do this, pour a little oil on a small piece of soft rag and wipe the surface with it. Then everything is washed off with a soapy solution.
  3. Various chemicals used by many in everyday life perfectly remove traces of double-sided tape. You can choose detergents that are used in industry. They will cope with any stains, including glue.

Before you begin the procedure for removing stains from adhesive tape, you need to determine the surface material. Otherwise, you can seriously damage an expensive item due to several barely noticeable traces of glue. If you are not sure that the item will not suffer, it is better to start cleaning with harmless means, such as detergents or vegetable oil. Then you will not have to regret the damaged surface of the cabinet or refrigerator.

Video: how to remove traces of glue from stickers, advertising and adhesive tape

We recommend reading


leave a comment

Submit

avatar
wpDiscuz

No comments yet! We are working to fix it!

No comments yet! We are working to fix it!

Pests

beauty

Repairs