How to strengthen nails with acrylic powder under gel polish

The extension is slowly becoming a thing of the past due to injury to the nails after removing the artificial plates. More and more girls prefer to have natural nails, but not every beautiful lady can boast beautiful fingers from nature. We are talking about the imperfections of the native nail plates. There are always cracks, bumps, gaps. Therefore, the issue of modeling is becoming quite relevant. Consider ways to use acrylic powder.

Properties of acrylic powder

A loose composition has a lot of advantages that are aimed at eliminating many problems with regards to nails:

1. Due to its porous and light structure, the powder does not clog the surface of the nails, allowing them to “breathe”.
2. In the process of applying the powder composition, the probability of the appearance of bubbles that look messy is excluded.
3. After using the powder, the nails become strong, their breakage and delamination are eliminated.
4. The powder perfectly copes with external irritants, such as ultraviolet, frost, household products.
5. Due to the wide variety of colors, powder can be selected for every taste, manicure options are endless.
6. The powder is weightless, when applied to the plates it is barely noticeable, so the nails look very natural.
7. All artificial materials for building injure the surface of the native nail, and the powder is aimed at correcting the shape without loss.
8. Powder-modeled nails can be easily corrected, which cannot be said about gel coatings.
9. To remove the acrylic layer, there are special tools that facilitate the removal of artificial surfaces.
10. The service life of manicure with acrylic powder reaches 3-4 weeks, sometimes longer.

Purpose of acrylic powder

1. Powdered, weightless composition refers to the category of acrylates. Polymer material is widely used by these masters to improve the natural shape of nails, fill voids, and smooth the surface of the plates.
2. The powder is combined with the monomer - a special liquid with which you can get a high-quality mixture for modeling. At the exit, we have a dense paste that dries in the air in a short time. Acrylic does not require a special ultraviolet lamp, unlike gel.
3. Specialists in the field of nail industry identify three areas of modeling acrylic powder. These include the creation of a volumetric design, general plate correction, repair of chips and cracks.
4. It is worth immediately clarifying that powder intended for strengthening or building up is one and the same material. However, to carry out repairs, use powder without a shade. The design is done with colored powder.
5. To conduct a full-fledged extension, as everyone is accustomed to seeing, it is necessary to have a powder of pink-beige undertones, which in color should match the shade of the nail bed. This is necessary to lengthen the plate itself.
6. If you aim to prepare nails for gel polish, use colorless or flesh-pink powder. This procedure will help you create a bonding layer between a natural plate and gel polish. As a result, the duration of the manicure socks will increase by an order of magnitude.
7. The use of powder to strengthen nails under gel polish has other advantages. After applying a color coating, the probability of getting irregularities or bubbles is reduced.Also, the powder fills microcracks, which could creep out under the action of gel polish even more.

Who is shown the use of acrylic powder

Do not assume that powder refers to expensive materials. You can buy the product relatively cheaply in specialized stores for nail masters.

Experienced experts recommend using a powder composition for girls who suffer from severe delamination, brittleness and cracks.

After applying the powder to the plate, all microcracks are filled, the paste hardens and becomes like cement. All this eliminates damage and severe injury to the nails.

Strengthening with powder will also help girls create a high-quality coating for gel polish, especially if the nail plates are depleted and thin from nature (strongly bend). For this category of people, experts do not recommend the use of gel extensions.

Strengthening nails with acrylic powder

First you need to prepare materials and tools:

• degreasing agent;
• antiseptic;
• acrylic powder;
• files with different abrasiveness;
• buff for polishing;
• monomer;
• primer (acidic or non-acidic, optional);
• brushes for removing excess dust;
• gel to give the cuticle softness;
• orange stylus (pusher) for manicure;
• finish (coating that fixes the result);
• tips for building;
• glue for tips and tipsorez;
• molds for mixing components;
• lamp for drying (UV).

Not all materials listed may be required. It all depends on the ultimate goal that you pursue. To strengthen the plates for gel polish, it is enough to have a minimal set: pusher, degreaser, antiseptic, buff and nail files, monomer with powder, primer.

Nail preparation

1. Make a manicure, but not trimmed. Steam the cuticle or treat it with a special softening gel. Use a pusher to push the skin to the base of the nail.
2. Free your nails from the old coating in advance, if any. Wash your hands, dry, treat with an antiseptic. Do the same with tools.
3. Saw the free edges of the plates, giving them the required length. Arm yourself with a buff, polish the surface by removing only the glossy layer. Degrease nails, proceed to strengthen manipulations.

Powder Nail Strengthening Technology

1. Wear a medical mask to protect your airways. Open a window for airing or carry out strengthening on a loggia in warm time.
2. Apply the primer over the polished plate, let it dry. Then apply the monomer in a thin layer. Now put some powder on the pusher, sprinkle a thick layer of monomer on top.
3. Do not spare the powder, it will not create tuberosity on the nails. After sprinkling the plates, send your hand under the UV lamp for 1.5 minutes (this step can be skipped if you do not have a UV lamp).
4. When the contents have hardened, sweep away the excess with a wide brush. Correct the nails with the help of files and buff. You have strengthened your nails under gel polish, now you can apply a color coating.

Important!
There is another way to strengthen the nail plates with acrylic powder. To do this, moisten the brush in liquid and immediately lower it into a jar of loose powder. Do not hesitate, step back 1 mm from the cuticle and spread the liquid paste throughout the plate. Seal the free edge of the nail. You can’t hesitate here, because the powder in combination with the polymer dries quickly. The layer should be thin and clear. Further filing and polishing are at the discretion, sometimes these actions are not required at all.

Cons of acrylic powder

1. Acrylic-based powder has a rather unpleasant odor. In some people, after using the composition, a deterioration in health is observed.Currently, acrylic powder can be purchased without smell, the price will be much higher.
2. Keep in mind that the composition must be used correctly. If you do not keep track of such a trifle as the gap between the powder and the nail, problems can arise. In such a “bubble”, pathogenic bacteria begin to multiply actively. Often a plate fungus and similar troubles are formed.
3. If you do not follow the practical recommendations and do not strengthen the nail, it can be easily damaged. Sometimes the powder adversely affects the appearance, the nail plate loses its pristine sheen.
4. It is worth knowing that a coating based on acrylic powder should not be removed using a classic nail polish remover with acetone. Aggressive composition negatively affects the structure of the nail plate, destroying it.
5. It is forbidden to wear an acrylic layer for a long time. To use powder, you need to have some skills. The composition quickly hardens in contact with water, so the procedure must be carried out wisely. If you do something wrong, the procedure must be repeated.

How to remove acrylic

In order not to harm the nail plate, it is important to learn how to properly remove the acrylic layer. To do this, moisten the cotton pieces in a special composition and wrap the fingertips with the product. Wrap foil over this. Wait about 10 minutes.

After the specified time, use the pusher and slide the coating to the edge of the plate. Use extreme caution.

If it was not possible to do everything the first time, repeat the manipulation. The rest of the composition must be removed with a soft buff. Do not overexpose the hands in the composition. Skin may suffer.

Practical recommendations

1. Masters in nail modeling recommend using nutritious varnishes. In addition, it is important to additionally take vitamins with a high content of calcium.
2. Remember, acrylic powder does not nourish the nail plate with minerals. The tool helps to fix the gel polish for longer wear. In order for the nail plate to remain strong and healthy, iodine, vitamins B, A are needed.
3. In order for the nail to be solid and at the same time elastic, iron and silicon must be enough in the body. Sulfur promotes rapid tissue repair. The daily diet should include red meat, plenty of vegetables, butter, and liver.
4. Acrylic powder gives strength to the nail plate, but you should use protective gloves when working around the house. Also, do not forget to systematically conduct a light nail massage. This improves blood circulation.
5. Every day you need to drink the proper amount of clean water. Moisturize your skin systematically with nourishing products. Nails should not suffer from dehydration. Do not often resort to procedures using gel polish and acrylic. The nail plate should rest and recover.
6. Remember, the use of acrylic is recommended exclusively with building at least a few millimeters. Otherwise, the free edge of the nail will break off or delaminate.

Acrylic powder is a good firming agent. It is important to be able to correctly apply the composition. To do this, you need to master some skills. If you are not confident in your abilities, use the services of a professional. Otherwise, do not rush. Follow step by step and you will surely succeed.

Video: nail strengthening with acrylic powder