How to uproot tree roots in a garden plot

A tree is a beautiful and useful plantation, the main element of the development of all living things, a producer of oxygen. However, even despite such high titles, sooner or later the tree dries up or rots, the result is one - it is cut down. Of course, there may be plenty of problems with removing the top, although even more questions relate to how to get rid of tree roots. If the land area allows, then you can use the power of special equipment, but what if the summer cottage is small, but I want the whole area to be occupied by useful plants? What are the ways to eliminate the large, strong and highly branched root system of the tree?

Why is it necessary to remove the roots after cutting the tree?

As everyone knows, the root system of a tree is the most complex, branched and located in diameter up to 7-9 meters. Even after the planting is sawn down, this plot of land will be unsuitable for planting - the soil will be clogged with roots, processes that resemble a tree trunk in structure, so that nothing will grow except weed. It is not rational to hope that the stump with its roots will decay completely by itself, because you have to wait at least 5-7 years, and in every way help the speedy process of decay in every way - regularly water it and maintain moisture ideal for decay.

In natural conditions, no one cares about removing the roots of the tree, but in summer cottages, garden plots this is done to preserve the usable area. Thus, if you want to increase the number of plantings and stare at the old stump, before you start planting, be sure to remove the old roots.

How to start removing tree roots

Before you immediately grab a shovel and try to loosen the ground with exorbitant force, you need to carry out intermediate work, namely:

• Determine the age of the tree
• Recognize what type of tree (or stump) is
• Calculate whether it is possible to drive to the old stump of bulky equipment, otherwise all the work will have to be done manually.

Determining the age of the tree is a very important stage of the event. This will help to approximately find out the location of the roots - for example, in a tree of 10 years of age they are 4 meters in diameter - the more the planting grows, the more work remains to be done.

The second stage of the intermediate work is as important as the first. For example, mountain ash has fewer lateral roots than oak, so it is much easier and easier to root it out.

If it is possible to create conditions for the passage of special equipment, do it. If it is impossible to remove the roots using the traction force of the machines, be patient and read the tips below.

Known methods for removing tree roots

Burning stump and root system
This method is the most simple and less laborious, however, one of the most dangerous. Due to the fact that the tree is dry and the roots quickly ignite, fire can spread to nearby buildings, especially if the burning is carried out in dry, windy weather. In order to secure the process of removing the roots of a tree without harming itself or its neighbors, it is recommended to use some kind of large old metal basin or trough (a 200 liter barrel is usually suitable). In the upper part, a small hole is made for ventilation and oxygen supply, and the stump itself is covered.In this design, the smoldering remains of the tree will occur, its destruction will be less dangerous and will not bring you any additional problems.

Rooting and digging a dry stump
There is another method of removing the roots of a tree - by digging and uprooting. Since the tree has a branched system, it is necessary to dig a trench around the tree, it should be a circle with a radius of 1 meter. After the digging is completed, it is necessary to swing the tree and chop down the bare roots with an ax. Very often, it is impossible to cope with a stump by ordinary human effort, so scrap is used, which is used as a backwater. The crowbar is introduced directly under the tree and with shaky movements they try to move the stump, thereby exposing the roots. Thus, the entire area around the tree passes - only after the lateral roots are sawn and freed, the stump can be moved, of course, using crowbar.

It is much easier to dig a stump using a special traction unit or when picking up a cable. A tractor can easily pull out a stump with all the roots, but this is beyond the power of cars. If you want to use such an effective method, you must contact a company that provides various services using a tractor. It is also possible to remove the roots with a bulldozer. In this case, the stump will be budged due to the sharp and strong pressure of the blade blade.

Soil erosion
If the soil in your area is sandy or clay, you can use the hydraulic method of removing roots. A shallow trench is dug next to the stump and a hose with a strong water pressure is inserted into it. Under the influence of a powerful jet, sand and clay are washed off, and the roots are exposed. This gives a great advantage, since you can cut or chop down the roots of the tree. Such a procedure must be done around the whole stump, and then propped up with a crowbar and displace the dry tree from its place.

Shredding the roots with wood cutters
Forest milling machines - a special installation for cutting and chopping roots up to 30 cm deep. This method is used by professional specialists and allows you to perform work as quickly as possible. It is not advisable to remove the roots in this way on their own, since forest cutters are quite expensive and it is an unjustified expense to chop the roots of a single tree. At home, you can use a puncher or grinder, but it will take more time and the tool can be quickly ruined.

Chemical way
Thanks to innovations in the chemical field, it became possible to remove the root system quickly and efficiently, using a special composition. Potassium or sodium nitrate has long been used in the United States to remove roots, which after combustion turns into ordinary fertilizer for the soil. Urea also contributes to rapid rotting - you just need to tightly wrap the stump with plastic wrap. The usual salt helps to get rid of rhizomes.

Biological method
This method is distinguished by its naturalness, as well as its dual benefits. To remove the stump and the remains of the root system, it is necessary to bring mushroom mushrooms or oyster mushroom mycelium from the forest. It is worthwhile to make wide holes in advance, to fill in them fertile forest land and arrange prepared seedlings. For reliability, cover with leaves or moss. Due to the fact that the mushrooms will suck out all the nutrients, the roots will rot at maximum speed. Only 2 years will pass, and there will not be a single trace from the stump, and you will additionally receive a large crop of honey mushrooms or oyster mushroom.

In order to remove the remnants of the tree from your site, you need to work hard. Choose the easiest method for yourself and start cleaning the site!

Video: how to extract the roots of a sawn tree from the ground