Hot scissor haircut - pros and cons

There are many hairdressing tools that are designed specifically for damaged hair. Today we will talk about hot scissors, through which thermal cutting is carried out. This tool refers to ordinary scissors that are plugged into an outlet. In the process, the blades heat up, and when they are cut, they solder the cut ends. Many girls prefer to get their hair cut in such a way as to preserve the shine and health of their hair for a long time. Let's look at all the positive and negative characteristics of the procedure.

The difference between hot scissors and ordinary

1. Thermal haircuts are carried out using hot scissors, which were designed specifically for hairdressers. The design of the tool is not much different from the structure of conventional scissors. The difference is only in the presence of a heating element and a wire that allows you to connect to an outlet.
2. The master independently sets the temperature mode, with which it is convenient for him to work. Also, the stylist sets the duration of heating, during this time the temperature will not fall below a predetermined mark.
3. As for the degree of heating, everything is individual and depends only on the state of the client’s hair. Dark-haired young ladies will need a higher temperature than owners of fair hair.

Varieties of haircuts with hot scissors

We can distinguish options for haircuts, which are divided into classification according to the cut length of the hair.

1. For those who grow their hair, there is no need to spray them with water from the spray gun during the procedure. The master removes the ends on dry hair, not greatly shortening the strands.
2. If a person came to the hairdresser with a specific goal - to make a completely new haircut, then all the manipulations are carried out on previously wetted hair. The final effect is perfect.
3. There are also so-called combined haircuts, in which not only hot, but also ordinary scissors are used. In some places (tips), the master uses a heating tool, but in all other areas (length) he works with simple scissors. This prevents cross-section and porosity.

Thermal cutting technology

1. This procedure is longer, in contrast to the usual haircut with ordinary scissors. If a specialist has realized his plan in less than 1 hour, he in any case violated the technology. Hot shearing can not last less than 60 minutes. Usually the process takes 1.5-3 hours, depending on the length of the hair and its condition.
2. Do not mistakenly believe that absolutely every hairdresser working with ordinary scissors can cope with a heating device. For this purpose, masters undergo further training, therefore, he must have the appropriate certificate. Before you go to the procedure, read the reviews.
3. The procedure itself is simple. The hairdresser twists each strand individually into a tourniquet, then heats the tool to 150-190 degrees and starts cutting. The ends of the hair will stick out along the flagellum in different directions, and their specialist will cut it.
4. Do not worry that during the procedure you will burn yourself on the device. Heating blades are strictly insulated. No need to agree to the proposal of the master to cut off the cut ends with ordinary scissors after processing them with a hot tool. There will be no use in this.

Cons and pros of thermal cutting

Do not lose sight of the fact that, like with any cosmetic procedure, thermal cutting has its pros and cons.Therefore, before going to a beauty salon, you should familiarize yourself with all the positive and negative features.

pros

1. If you systematically resort to the help of this procedure, the curls will become more thick. A similar effect is achieved by improving the structure of the hair. Also, hair is subject to less hair loss. For the fair sex this is an essential factor.
2. In addition, thermal cutting allows you to completely restore curls after harmful procedures. Among these, it is necessary to distinguish perm, frequent dyeing and the use of thermal devices.
3. In addition, among the pluses, it is worth highlighting the fact that after cutting, the tip of the hair is sealed. This move prevents further section of the strands. Hair becomes less susceptible to environmental damage.

Minuses

1. Unfortunately, the procedure has its drawbacks. Separately, it is worth highlighting the high cost of thermal cutting. This procedure is different from the standard. Also, the master cannot give you exact guarantees to improve the condition of your hair.
2. The procedure takes up a significant part of the time. During thermal cutting, each strand is processed separately. Therefore, when going to a specialist, you should be patient.
3. After a successful procedure, it is mandatory to minimize the risks of traumatic factors. Otherwise, the effect of thermal cutting will not last long. Also, after the procedure, it seems that the density of the hair is significantly reduced.
4. Opinions of experts on the procedure differ. On the one hand, sealing the tips protects the hair from the negative effects of the environment. On the other hand, the harmful substances that are released from the hair simply cannot escape. However, such arguments are not confirmed by anything.

It should be understood that even if you have a professional tool at home, it is strictly forbidden to carry out the procedure yourself. The specialist must determine the individual temperature for your hair based on their characteristics. To carry out a haircut in this way should be about 1 time per month. Before you go to a beauty salon, study all the pros and cons of the procedure.

Video: cutting with hot scissors - what and how?